SONY Z3 如何ROOT?

woff

Sony Xperia Z3 users can now enjoy the core hardware and software features, as root access is now available for the device.

Senior XDA member, monx, has shared the TWRP v2.8.0.1 file through which the Xperia Z3 can be rooted. The root method uses SuperSU file by Chainfire. The member has confirmed the root method works on Z3 variants such as D6653, D6603 and D6633 with unlocked bootloder.

Head over to the development thread to know more about the root release for Xperia Z3.

Those who wish to root their Xperia Z3 using TWRP v2.8.0.1 may follow the guide below.

Points to remember

• Install latest and working drivers for the Xperia Z3.
• Before following the guide, ensure that you have backed up all data of the device.
• The phone should have an unlocked boot loader. [Click here for help]
• If the phone goes off during the process due to lack of battery, it could damage the device. Therefore the phone should have above 80% of charge.
• The TWRP file and the root process work on Xperia Z3 models such as D6653, D6603 and D6633. Flashing these files on any other variant might brick the device. Therefore, verify the[color=rgb(243, 147, 59) !important][backcolor=transparent !important]model number of Xperia Z3 by navigating to Setting>> About phone>> Model number.
• Unlocking the [color=rgb(243, 147, 59) !important][backcolor=transparent !important]bootloader and installing root files will nullify [color=rgb(243, 147, 59) !important][backcolor=transparent !important]the warranty of the smartphone.
  

IBTimes UK reminds its readers that it will not be held liable for any damage to the device.

如何安裝 TWRP recovery到Sony Xperia Z3

How to install TWRP recovery on Sony Xperia Z3

Step-1: Download recovery boot file

Download link: bootZ3monxtest01.img

1.下載 bootZ3monxtest01.img

Step-2: Download ADB and fastboot file

Download link: adb-and-fastboot-files.zip

2.下載 ADB 和 fastboot

adb-and-fastboot-files.zip

Step-3: Extract adb-and-fastboot-files.zip using any extracting tool to a separate folder on the computer

3.解壓縮 adb-and-fastboot-files.zip 到你的電腦上

Step-4: Copy the bootZ3monxtest10.img file to same folder where the adb and fastboot files are saved

4.複製bootZ3monxtest10.img到與ADB和fastboot 同一個資料夾下

Step-5: Press Shift and Right-Click on an empty space inside the folder and select Open command window here from the context menu. This will open a command prompt window

5.壓Shift鍵和 滑鼠右鍵 COPY檔案到一個空目錄下，開啟終端機

Step-6: Boot into fastboot mode. To do so first power off the phone. Press and hold Volume Up button. Connect the phone to the PC using a USB cable while holding the Volume Up button on the Xperia Z3

6.啟動SONY Z3 FASTBOOT模式(壓音源鍵+ 及 電源鍵，須事先安裝SONY USB DRIVER)

Note: Before plugging in the USB cable to Xperia Z3, ensure that the other end of the USB cable is already connected to the PC.

Step-7: Type in the following in the command prompt window

fastboot devices

7.接上USB線，進入fastboot devices模式

Step-8: Enter the following command

fastboot flash boot bootZ3monxtest01.img

8.flash bootZ3monxtest01.img

Step-9: Wait for some time until fastboot completes flashing the boot image which contains TWRP recovery

9.等一下就可安裝TWRP

Step-10: Reboot the phone by typing the following command

fastboot reboot

10.安裝完成會自動重新開機

The Xperia Z3 should reboot into recovery. When it boots up the TWRP recovery should be installed on the phone.

How to boot Xperia Z3 into recovery mode

• Switch off the Xperia Z3
• Turn the phone and when the phone's LED notification light turns pink, start pressing theVolume Up or Volume Down button for a couple of times to boot the phone into recovery mode
  

How to root Sony Xperia Z3 using TWRP recovery

Step-1: Download the SuperSU root file

Download link: UPDATE-SuperSU-v2.02.zip

1.下載並安裝 SuperSU

UPDATE-SuperSU-v2.02.zip

Step-2: Move the downloaded root file to a safe location on your phone

2.移動檔案UPDATE-SuperSU-v2.02.zip到SD卡或手機內部

Step-3: Boot Xperia Z3 into TWRP recovery mode (Check the above mentioned steps)

3.Xperia Z3開機進入TWRP recovery模式

Step-4: In recovery mode, perform a Nandroid backup. It is optional but important if something goes wrong you can restore the current status easily. Navigate to Settings>> select all checkboxes and do a swipe on the Swipe to confirm option

4.設定選擇SDCARD路徑找到UPDATE-SuperSU-v2.02.zip檔案

Step-5: Go to Install>> head over to the location where the SuperSu file is saved. Tap on the root file, and then do a swipe on Swipe to confirm flash option at the bottom of the screen

安裝 UPDATE-SuperSU-v2.02.zip 並重新開機

Step-6: Once the installation process is completed, reboot the phone. From the main recovery menu tap on Reboot>> tap on System

The Xperia Z3 should now be rooted successfully with the TWRP recovery installed.

6.ROOT成功並在桌面上看到SuperSU