[研究] MRTG 快速安裝程式 (CentOS 5.1)

woff

MRTG官方安裝方法
http://oss.oetiker.ch/mrtg/doc/mrtg-unix-guide.en.html

修改後的步驟重點說明

(1)安裝 gcc , perl, gd, libpng, zlib, mrtg , snmp, httpd 等套件

1. yum  -y  gcc , perl, gd, libpng, zlib, mrtg

複製代碼

(2) yum 安裝的 net-snmp 似乎有問題, 只好自己去下載, 安裝, 執行

http://net-snmp.sourceforge.net/

1. tar  zxvf  net-snmp-5.4.1.tar.gz
   
2. cd  net-snmp-5.4.1
   
3. ./configurfe
   
4. make
   
5. make  install
   
6. /bin/cp -f  ./python/netsnmp/tests/snmpd.conf   /usr/local/etc/snmp/snmpd.conf

複製代碼

在 /usr/local/etc/snmp/snmpd.conf 增加兩行
數值意義請參考
http://oss.oetiker.ch/mrtg/doc/mrtg-mibhelp.en.html

1. view systemview included .1.3.6.1.2.1.2.2.1.10
   
2. view systemview included .1.3.6.1.2.1.2.2.1.16

複製代碼

把系統中現有的 snmpd 停掉, 執行新安裝的

1. killall snmpd
   
2. /usr/local/sbin/snmpd  -c   /usr/local/etc/snmp/snmpd.conf

複製代碼

(3) 編輯 MRTG 設定檔

編輯 /etc/mrtg/mrtg.cfg , 內容只要有下面即可

1. Target[eth0]: 2:public@127.0.0.1"
   
2. MaxBytes[eth0]: 1250000"
   
3. Title[eth0]: Traffic Analysis"
   
4. PageTop[eth0]: <H1>127.0.0.1 eth0</H1>

複製代碼

public 前面的數字可用下面偵測, 一般 eth0 代號是 2

1. ip  link

複製代碼

(4) 產生基本網頁

執行 3 次下面指令, 產生基本網頁

1. env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg
   
2. env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg
   
3. env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg

複製代碼

(5) 產生 MRTG 首頁

執行

1. indexmaker /etc/mrtg/mrtg.cfg > /var/www/mrtg/index.html

複製代碼

(6) 設定排程

vi /etc/crontab 增加一行

1. */5 * * * * root env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg  > /dev/null 2>&1

複製代碼

(7) 啟動 MRTG 監控

1. firefox http://localhost/mrtg &

複製代碼

MRTG為一個使用甚廣的網路流量統計軟體，它神奇的地方在於能即時地繪出網路流量的統計圖。

MRTG官方安裝方法
http://oss.oetiker.ch/mrtg/doc/mrtg-unix-guide.en.html

這是小弟寫的快速安裝程式, 基本上都使用 yum 安裝
除了 snmp 似乎有問題 (請看下篇)

[研究] snmpd dead but pid file exists
http://forum.icst.org.tw/phpBB2/viewtopic.php?t=14861

net-snmp-5.4.1.tar.gz 請自己到下面抓下
http://downloads.sourceforge.net/net-snmp/net-snmp-5.4.1.tar.gz?modtime=1185535805&big_mirror=1

小弟本想用 wget 抓下, 結果抓完後就停住, 按下 Enter 居然跳出 Shell Script

1. 
   
2. echo -e "\033[34m"
   
3. echo -e "############################################"
   
4. echo -e " MRTG Install Shell Script (CentOS 5.1) "
   
5. echo -e " by Lu 2008/04/18 "
   
6. echo -e "############################################"
   
7. echo -e "\033[0m"
   
8. 
   
9. DEBUG=n
   
10. 
    
11. if [ "`cat /proc/version | grep centos | grep el5`" != "" ]; then
    
12.   OS="CentOS 5.x"
    
13.   echo "Detection your OS is CentOS 5.x"
    
14. else
    
15.   echo "[ERROR] Only Support CentOS 5.x"
    
16.   exit
    
17. fi
    
18. 
    
19. echo -e "\033[31m"
    
20. echo -e "############# Step ###############"
    
21. echo -e " Internet Connection Check "
    
22. echo -e "####################################"
    
23. echo -e "\033[0m"
    
24. 
    
25. echo -e "\033[32mCheck...\033[0m"
    
26. if [ "`ping  www.hinet.net  -c 1 | grep ttl `"  !=  "" ]; then
    
27.   echo "Internet Online"
    
28. else
    
29.   echo "Internet Offline"
    
30.   exit
    
31. fi  
    
32. 
    
33. if [ "$DEBUG" == "y" ]; then echo "ress any key to continue..." ; read ; fi
    
34. 
    
35. echo -e "\033[31m"
    
36. echo -e "############# Step ###############"
    
37. echo -e " ntpdate tick.stdtime.gov.tw "
    
38. echo -e "####################################"
    
39. echo -e "\033[0m"
    
40. 
    
41. echo -e "\033[32mKill nptd on running...\033[0m"
    
42. ProcessID="`ps aux | grep ntpd | awk '{print $2}' `"
    
43. for i in $ProcessID
    
44. do
    
45.   echo $i
    
46.   kill -9 $i
    
47. done
    
48. ntpdate tick.stdtime.gov.tw
    
49. if [ "$DEBUG" == "y" ]; then echo "ress any key to continue..." ; read ; fi
    
50. 
    
51. echo -e "\033[31m"
    
52. echo -e "############# Step ###############"
    
53. echo -e " Configure MRTG Install Enviroment "
    
54. echo -e "####################################"
    
55. echo -e "\033[0m"
    
56. 
    
57. echo -e "\033[32myum -y install net-snmp mrtg gd libpng zlib sysstat gcc\033[0m"
    
58. 
    
59. echo -e "\033[31m'yum -y install net-snmp' has serious BUG on CentOS 5.x (net-snmp 5.3.x rpm has BUG) \033[0m"
    
60. echo -e "\033[31mservice snmpd start, ps aux | grep, you will find that snmpd does not run \033[0m"
    
61. echo -e "\033[31mI will use tar.gz to install net-snmp 5.4.x \033[0m"
    
62. 
    
63. echo -e "\033[32mKill yum on running...\033[0m"
    
64. ProcessID="`ps aux | grep yum | awk '{print $2}' `"
    
65. for i in $ProcessID
    
66. do
    
67.   echo $i
    
68.   kill -9 $i
    
69. done
    
70. 
    
71. YUMARGS=""
    
72. 
    
73. if [ "`rpm -q httpd | grep not`" != "" ]; then
    
74.   YUMARGS="$YUMARGS httpd"
    
75.   echo "httpd not installed"
    
76. else
    
77.   echo "httpd installed"  
    
78. fi
    
79. 
    
80. if [ "`rpm -q mrtg | grep not`" != "" ]; then
    
81.   YUMARGS="$YUMARGS mrtg"
    
82.   echo "mrtg not installed"
    
83. else      
    
84.   echo "mrtg installed"  
    
85. fi  
    
86. 
    
87. if [ "`rpm -q gd | grep not `" != "" ]; then
    
88.   YUMARGS="$YUMARGS gd"
    
89.   echo "gd not installed"
    
90. else
    
91.   echo "gd installed"  
    
92. fi
    
93. 
    
94. if [ "`rpm -q libpng | grep not `" != "" ]; then
    
95.   YUMARGS="$YUMARGS libpng"
    
96.   echo "libpng not installed"
    
97. else
    
98.   echo "libpng installed"  
    
99. fi
    
100. 
     
101. if [ "`rpm -q zlib | grep not `" != "" ]; then
     
102.   YUMARGS="$YUMARGS zlib"
     
103.   echo "zlib not installed"
     
104. else
     
105.   echo "zlib installed"  
     
106. fi
     
107. 
     
108. if [ "`rpm -q sysstat | grep not `" != "" ]; then
     
109.   YUMARGS="$YUMARGS sysstat"
     
110.   echo "sysstat not installed"
     
111. else
     
112.   echo "sysstat installed"  
     
113. fi
     
114. 
     
115. if [ "`rpm -q gcc | grep not `" != "" ]; then
     
116.   YUMARGS="$YUMARGS gcc"
     
117.   echo "gcc not installed"
     
118. else
     
119.   echo "gcc installed"  
     
120. fi
     
121. 
     
122. #echo $YUMARGS
     
123. 
     
124. if [ ! "$YUMARGS" == "" ]; then
     
125.   echo -e "\033[32mrm -fr /var/cache/yum \033[0m"
     
126.   rm -fr /var/cache/yum
     
127.   echo -e "\033[32myum -y install $YUMARGS \033[0m"  
     
128.   yum -y install $YUMARGS
     
129. fi
     
130. 
     
131. if [ ! -s net-snmp-5.4.1.tar.gz ]; then
     
132.   #wget http://downloads.sourceforge.net/net-snmp/net-snmp-5.4.1.tar.gz?modtime=1185535805&big_mirror=1
     
133.   # bug ? wget finish will quit shell scipt
     
134.   echo "Not found net-snmp-5.4.1.tar.gz"
     
135.   exit
     
136. fi
     
137. 
     
138. echo -e "\033[32mtar zxvf net-snmp-5.4.1.tar.gz \033[0m"
     
139. tar zxvf net-snmp-5.4.1.tar.gz
     
140. 
     
141. echo -e "\033[32mcd net-snmp-5.4.1 \033[0m"
     
142. cd net-snmp-5.4.1
     
143. pwd
     
144. 
     
145. echo -e "\033[32m./configure \033[0m"
     
146. ./configure
     
147. echo -e "\033[32mmake \033[0m"
     
148. make
     
149. echo -e "\033[32mmake install \033[0m"
     
150. make install
     
151. 
     
152. mkdir /usr/local/etc/snmp
     
153. /bin/cp -f ./python/netsnmp/tests/snmpd.conf   /usr/local/etc/snmp/snmpd.conf
     
154. /bin/cp -f ./python/netsnmp/tests/snmpd.conf   /usr/local/etc/snmp/snmpd.conf.OLD
     
155. 
     
156. echo -e "\033[32mchkconfig httpd on \033[0m"
     
157. chkconfig httpd on
     
158. echo -e "\033[32mservice httpd restart \033[0m"
     
159. service httpd restart
     
160. echo -e "\033[32mkillall snmpd \033[0m"
     
161. killall snmpd
     
162. echo -e "\033[32m/usr/local/sbin/snmpd \033[0m"
     
163. /usr/local/sbin/snmpd
     
164. 
     
165. echo -e "\033[32mModify /etc/mrtg/mrtg.cfg\033[0m"
     
166. if [ ! -s  /etc/mrtg/mrtg.cfg.OLD ]; then
     
167. /bin/cp -f  /etc/mrtg/mrtg.cfg  /etc/mrtg/mrtg.cfg.OLD
     
168. fi
     
169. /bin/cp -f  /etc/mrtg/mrtg.cfg.OLD  /etc/mrtg/mrtg.cfg
     
170. #delete old setting
     
171. sed -i -e "/eth0/d" /etc/mrtg/mrtg.cfg
     
172. #add new setting
     
173. echo "Target[eth0]: 2:public@127.0.0.1" >> /etc/mrtg/mrtg.cfg
     
174. echo "MaxBytes[eth0]: 1250000" >> /etc/mrtg/mrtg.cfg
     
175. echo "Title[eth0]: Traffic Analysis" >> /etc/mrtg/mrtg.cfg
     
176. echo "ageTop[eth0]: <H1>127.0.0.1 eth0</H1>" >> /etc/mrtg/mrtg.cfg
     
177. 
     
178. echo -e "\033[31m"
     
179. echo -e "############# Step ###############"
     
180. echo -e " Modify /etc/crontab "
     
181. echo -e "####################################"
     
182. echo -e "\033[0m"
     
183. 
     
184. 
     
185. echo -e "\033[32mModify /etc/crontab\033[0m"
     
186. #echo "Deleting old setting , Adding MRTG to /etc/crontab..."
     
187. sed -i -e "/mrtg/d"  /etc/crontab
     
188. echo "*/5 * * * * root env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg  > /dev/null 2>&1 " >> /etc/crontab
     
189. echo "" >> /etc/crontab
     
190. 
     
191. echo -e "\033[31m"
     
192. echo -e "############# Step ###############"
     
193. echo -e " Modify snmpd.conf "
     
194. echo -e "####################################"
     
195. echo -e "\033[0m"
     
196. 
     
197. echo -e "\033[32mModify snmpd.conf\033[0m"
     
198. 
     
199. echo "view systemview included .1.3.6.1.2.1.2.2.1.10" >> /usr/local/etc/snmp/snmpd.conf
     
200. echo "view systemview included .1.3.6.1.2.1.2.2.1.16" >> /usr/local/etc/snmp/snmpd.conf
     
201. killall snmpd
     
202. /usr/local/sbin/snmpd  -c   /usr/local/etc/snmp/snmpd.conf
     
203. 
     
204. 
     
205. echo -e "\033[31m"
     
206. echo -e "############# Step ###############"
     
207. echo -e " Modify /etc/httpd/conf.d/mrtg.conf "
     
208. echo -e "####################################"
     
209. echo -e "\033[0m"
     
210. 
     
211. echo -e "\033[32mModify /etc/httpd/conf.d/mrtg.conf\033[0m"
     
212. if [ ! -s  /etc/httpd/conf.d/mrtg.conf.OLD ]; then
     
213. /bin/cp -f  /etc/httpd/conf.d/mrtg.conf  /etc/httpd/conf.d/mrtg.conf.OLD
     
214. fi
     
215. /bin/cp -f  /etc/httpd/conf.d/mrtg.conf.OLD  /etc/httpd/conf.d/mrtg.conf
     
216. #Allow monitor from anywhere
     
217. sed -i -e "s@Deny from all@#Deny from all@" /etc/httpd/conf.d/mrtg.conf
     
218. 
     
219. 
     
220. echo -e "\033[31m"
     
221. echo -e "############# Step ###############"
     
222. echo -e " Configure CPU Monitor "
     
223. echo -e "####################################"
     
224. echo -e "\033[0m"
     
225. 
     
226. echo -e "\033[32m********** Set CPU Monitor **********\033[0m"
     
227. #yum -y install sysstat
     
228. 
     
229. echo -e "\033[32mMake /etc/mrtg/cpu.sh\033[0m"
     
230. echo "#!/bin/bash" > /etc/mrtg/cpu.sh
     
231. echo "cpuusr=\`/usr/bin/sar -u 1 3 | grep Average | awk '{print \$3}'\`  " >> /etc/mrtg/cpu.sh
     
232. echo "cpusys=\`/usr/bin/sar -u 1 3 | grep Average | awk '{print \$5}'\`  " >> /etc/mrtg/cpu.sh
     
233. echo "UPtime=\`/usr/bin/uptime | awk '{print \$3\"\"\$4\"\"\$5}'\`  " >> /etc/mrtg/cpu.sh
     
234. echo "echo \$cpuusr  " >> /etc/mrtg/cpu.sh
     
235. echo "echo \$cpusys  " >> /etc/mrtg/cpu.sh
     
236. echo "echo \$UPtime  " >> /etc/mrtg/cpu.sh
     
237. echo "hostname  " >> /etc/mrtg/cpu.sh
     
238. 
     
239. #/bin/cp -f cpu.sh /etc/mrtg/cpu.sh
     
240. chmod 755 /etc/mrtg/cpu.sh
     
241. 
     
242. echo -e "\033[32mModify /etc/mrtg/mrtg.cfg\033[0m"
     
243. 
     
244. sed -i -e "/cpu/d" /etc/mrtg/mrtg.cfg
     
245. echo " "  >> /etc/mrtg/mrtg.cfg
     
246. echo "Target[cpu]: \`/etc/mrtg/cpu.sh\`  " >> /etc/mrtg/mrtg.cfg
     
247. echo "MaxBytes[cpu]: 100  " >> /etc/mrtg/mrtg.cfg
     
248. echo "Options[cpu]: gauge, nopercent, growright    " >> /etc/mrtg/mrtg.cfg
     
249. echo "YLegend[cpu]: CPU loading (%)  " >> /etc/mrtg/mrtg.cfg
     
250. echo "ShortLegend[cpu]: %  " >> /etc/mrtg/mrtg.cfg
     
251. echo "LegendO[cpu]:   CPU us;  " >> /etc/mrtg/mrtg.cfg
     
252. echo "LegendI[cpu]:   CPU sy;  " >> /etc/mrtg/mrtg.cfg
     
253. echo "Title[cpu]: CPU Loading  " >> /etc/mrtg/mrtg.cfg
     
254. echo "ageTop[cpu]: <H1>CPU Loading</H1>  " >> /etc/mrtg/mrtg.cfg
     
255. 
     
256. 
     
257. echo -e "\033[31m"
     
258. echo -e "############# Step ###############"
     
259. echo -e " Configure Memory Monitor "
     
260. echo -e "####################################"
     
261. echo -e "\033[0m"
     
262. 
     
263. echo -e "\033[32myum -y install sysstat\033[0m"
     
264. #yum -y install sysstat
     
265. 
     
266. echo -e "\033[32mMake /etc/mrtg/mem.sh\033[0m"
     
267. 
     
268. echo "#!/bin/bash  " > /etc/mrtg/mem.sh
     
269. echo "# run this script to check the mem usage.  " >> /etc/mrtg/mem.sh
     
270. echo "totalmem=\`/usr/bin/free |grep Mem |awk '{print \$2}'\`  " >> /etc/mrtg/mem.sh
     
271. echo "usedmem=\`/usr/bin/free |grep Mem |awk '{print \$3}'\`  " >> /etc/mrtg/mem.sh
     
272. echo "UPtime=\`/usr/bin/uptime | awk '{print \$3\"\"\$4\"\"\$5}'\`  " >> /etc/mrtg/mem.sh
     
273. echo "echo \$totalmem  " >> /etc/mrtg/mem.sh
     
274. echo "echo \$usedmem  " >> /etc/mrtg/mem.sh
     
275. echo "echo \$UPtime  " >> /etc/mrtg/mem.sh
     
276. echo "hostname  " >> /etc/mrtg/mem.sh
     
277. 
     
278. 
     
279. #/bin/cp -f mem.sh /etc/mrtg/mem.sh
     
280. chmod 755 /etc/mrtg/mem.sh
     
281. 
     
282. echo -e "\033[32mModify /etc/mrtg/mrtg.cfg\033[0m"
     
283. 
     
284. sed -i -e "/ram/d" /etc/mrtg/mrtg.cfg
     
285. echo " "  >> /etc/mrtg/mrtg.cfg
     
286. echo "Target[ram]: \`/etc/mrtg/mem.sh\`  " >> /etc/mrtg/mrtg.cfg
     
287. echo "#Unscaled[ram]: dwym  " >> /etc/mrtg/mrtg.cfg
     
288. echo "MaxBytes[ram]: 2048000  " >> /etc/mrtg/mrtg.cfg
     
289. echo "Title[ram]:Memory  " >> /etc/mrtg/mrtg.cfg
     
290. echo "ShortLegend[ram]: &  " >> /etc/mrtg/mrtg.cfg
     
291. echo "kmg[ram]:kB,MB  " >> /etc/mrtg/mrtg.cfg
     
292. echo "kilo[ram]:1024  " >> /etc/mrtg/mrtg.cfg
     
293. echo "YLegend[ram]:   Memory Usage :  " >> /etc/mrtg/mrtg.cfg
     
294. echo "Legend1[ram]:   Total Memory :  " >> /etc/mrtg/mrtg.cfg
     
295. echo "Legend2[ram]:   Used Memory :  " >> /etc/mrtg/mrtg.cfg
     
296. echo "LegendI[ram]:   Total Memory :  " >> /etc/mrtg/mrtg.cfg
     
297. echo "LegendO[ram]:   Used Memory :  " >> /etc/mrtg/mrtg.cfg
     
298. echo "Options[ram]: growright,gauge,nopercent  " >> /etc/mrtg/mrtg.cfg
     
299. echo "ageTop[ram]:<H1>Memory</H1>  " >> /etc/mrtg/mrtg.cfg
     
300. 
     
301. 
     
302. echo -e "\033[31m"
     
303. echo -e "############# Step ###############"
     
304. echo -e " Configure Connections Monitor "
     
305. echo -e "####################################"
     
306. echo -e "\033[0m"
     
307. 
     
308. echo -e "\033[32myum -y install sysstat\033[0m"
     
309. #yum -y install sysstat
     
310. 
     
311. echo -e "\033[32mMake /etc/mrtg/connections.sh\033[0m"
     
312. 
     
313. echo "#!/bin/bash  " > /etc/mrtg/connections.sh
     
314. echo "echo \`netstat -a | grep www|awk '{print \$5}'|sort | wc -l|awk '{print\$1 - 1}'\`  " >> /etc/mrtg/connections.sh
     
315. echo "# netstat -a | grep www|awk '{print \$5}'|sort| uniq  " >> /etc/mrtg/connections.sh
     
316. echo "echo \`netstat -a | grep www|awk '{print \$5}'|cut -d\":\" -f1|sort| uniq |wc -l | awk '{print \$1 - 1}'\`  " >> /etc/mrtg/connections.sh
     
317. echo "# netstat -a | grep www|awk '{print \$5}'|cut -d\":\" -f1|sort| uniq  " >> /etc/mrtg/connections.sh
     
318. echo "UPtime=\`/usr/bin/uptime | awk '{print \$3 " " \$4 " " \$5}'\`  " >> /etc/mrtg/connections.sh
     
319. echo "echo \$UPtime  " >> /etc/mrtg/connections.sh
     
320. echo "echo yourwebserver.host.name  " >> /etc/mrtg/connections.sh
     
321. 
     
322. #/bin/cp -f connections.sh /etc/mrtg/connections.sh
     
323. chmod 755 /etc/mrtg/connections.sh
     
324. 
     
325. echo -e "\033[32mModify /etc/mrtg/mrtg.cfg\033[0m"
     
326. 
     
327. sed -i -e "/connections/d" /etc/mrtg/mrtg.cfg
     
328. echo " "  >> /etc/mrtg/mrtg.cfg
     
329. echo "Target[connections]: \`/etc/mrtg/connections.sh\`  " >> /etc/mrtg/mrtg.cfg
     
330. echo "MaxBytes[connections]: 500  " >> /etc/mrtg/mrtg.cfg
     
331. echo "Options[connections]: gauge, nopercent, growright  " >> /etc/mrtg/mrtg.cfg
     
332. echo "YLegend[connections]: Online Users  " >> /etc/mrtg/mrtg.cfg
     
333. echo "ShortLegend[connections]: %  " >> /etc/mrtg/mrtg.cfg
     
334. echo "LegendI[connections]:   connections (Input) :  " >> /etc/mrtg/mrtg.cfg
     
335. echo "LegendO[connections]:   connections (Output) :  " >> /etc/mrtg/mrtg.cfg
     
336. echo "Title[connections]: WWW connections  " >> /etc/mrtg/mrtg.cfg
     
337. echo "ageTop[connections]: <H1> WWW connections </H1>  " >> /etc/mrtg/mrtg.cfg
     
338. #echo "<TABLE>  " >> /etc/mrtg/mrtg.cfg
     
339. #echo "  <TR><TD>System:</TD>   <TD>WWW connections</TD></TR>  " >> /etc/mrtg/mrtg.cfg
     
340. #echo "  <TR><TD>Maintainer:</TD> <TD>Lu</TD></TR>  " >> /etc/mrtg/mrtg.cfg
     
341. #echo "</TABLE>  " >> /etc/mrtg/mrtg.cfg
     
342. 
     
343. #mii-tool
     
344. #ip  link
     
345. 
     
346. echo -e "\033[31m"
     
347. echo -e "############# Step #################################"
     
348. echo -e " To generate MRTG Log, suggest to run three times "
     
349. echo -e "####################################################"
     
350. echo -e "\033[0m"
     
351. 
     
352. #To generate MRTG Log, suggest to run three times
     
353. echo -e "\033[32menv LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg\033[0m"
     
354. env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg
     
355. echo -e "\033[32menv LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg\033[0m"
     
356. env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg
     
357. echo -e "\033[32menv LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg\033[0m"
     
358. env LANG=C /usr/bin/mrtg /etc/mrtg/mrtg.cfg
     
359. 
     
360. echo -e "\033[31m"
     
361. echo -e "############# Step ###############"
     
362. echo -e " To generate index.html "
     
363. echo -e "##################################"
     
364. echo -e "\033[0m"
     
365. 
     
366. echo -e "\033[32mindexmaker --output=/var/www/mrtg/index.html /etc/mrtg/mrtg.cfg\033[0m"
     
367. indexmaker /etc/mrtg/mrtg.cfg > /var/www/mrtg/index.html
     
368. 
     
369. echo -e "\033[31m"
     
370. echo -e "############# Step ###############"
     
371. echo -e " Run MRTG "
     
372. echo -e "##################################"
     
373. echo -e "\033[0m"
     
374. 
     
375. echo -e "\033[32mps aux | grep snmpd \033[0m"
     
376. ps aux | grep snmpd
     
377. echo -e "\033[32m Configuration :/etc/mrtg/mrtg.cfg\033[0m"
     
378. echo -e "\033[32m Configuration :/etc/httpd/conf.d/mrtg.conf\033[0m"
     
379. echo -e "\033[32m Configuration :/usr/local/etc/snmp/snmpd.conf\033[0m"
     
380. echo -e "\033[32m Log :/var/log/snmpd.log \033[0m"
     
381. 
     
382. echo -e "\033[32mfirefox http://localhost/mrtg &\033[0m"
     
383. firefox http://localhost/mrtg &

複製代碼

相關文章

[教學][研究] MRTG 快速安裝程式 (CentOS 5.1)
http://forum.icst.org.tw/phpBB2/viewtopic.php?t=14871

[教學][研究] F7 (Fedora 7) 上安裝 MRTG (yum安裝)
http://forum.icst.org.tw/phpBB2/viewtopic.php?t=13689

FC4 (Fedora Core 4) 上如何安裝 MRTG
http://forum.icst.org.tw/phpBB2/viewtopic.php?t=7014

FC3 (Fedora Core 3) 上安裝 MRTG 步驟
http://forum.icst.org.tw/phpBB2/viewtopic.php?t=8168

監控網路鏈路流量負載軟體Mrtg使用指南
http://forum.icst.org.tw/phpBB2/viewtopic.php?t=7094

Prada

樓上的稍等啦  

kobe15963

(*^__^*) 嘻嘻……   

hyman0953

真的有麼好嗎？

+赤月冥静

谢谢哦，辛苦辛苦！
滨海论坛11fcw.com/portal.php

霓过分虹

  不敢相信哦

ozzku

我在努力中












恐怖高校